UT-HA-II Hand-push Airless Road Marking Machine

Performance Description of UT-HA-II Hand-push Airless Road Marking Machine:

UT-HA-II Hand-push Airless Road Marking Machine, compared with UT-HA-I road marking machine, except the function of glass beads dispensing and glass beads bin of UT-HA-I, the other technical indices and parameters are basically same as that of UT-HA-I.

Technical Data of UT-HA-II Hand-push Airless Road Marking Machine:

1. Engine: Japanese Robin 6.0HP or Honda 5.5HP four-stroke air-cooled gasoline engine.

2. Dimensions: 1350*1000*1000mm (L*W*H)

3. Total weight: 180kg

4. Marking width: 100~450mm

5. Capacity of paint tank: 65L 

6. Paint pump: max pressure is20Mpa (working pressure is 10-15Mpa), max flow: 8.5L/min

Note:

1. Option for line driver UT-RB-II for operator to realize automatic function.

2. B type is stainless steel spray system, which is suitable for water based paint.

3. Except all the functions of B type, C type equips with a micro-electric control system, which consists of Micro-electric controller, on-off coder, electromagnet, special gun bracket and so on. This system can be set four kinds of marking way according to the national road marking standard, and realized fully control.

You may also be interested in this/these product(s)

Small Air Spraying Road Marking Machine

Small Sitting Type Cold-painting Road Marking Machine